Vacuum Bagging Film

Min. Order: 1 Roll
Payment Terms: T/T
Vacuum Bagging Film

Product Description

1. Width: 10mm-2400mm(e. G.: 30mm, 60mm, 80mm, 110mm);

2. Thickness: 25um-180um(e. G.: 40um, 50um, 60um, 80um);

3. Length: At your request;

4. Excellent tensile strength;

5. High thermal stability;

6. User-friendly operation;

7. Good elongation, heat resistance and gas-seal property;

8. The film mainly used for thermoforming products;

9. We can produce the goods according to the customer's request.

This is a special nylon bagging film that is much softer and elastic so it can be layed up over extremely large parts and used with difficult contours.

There should be no problem with making difficult bagging procedures with ears

The Vacuum Bagging Film is widely used in Advance Composites Industries. This film is used to cover and seal the mould surface under vacuum condition in the process called Vacuum Infusion. This film is widely used due to is excellent physical properties such as high temperature resistance, toughness, good flexibility, high elongation and very less permeability.

Normally colour is green heat stabilized and material is nylon.
It has excellent elongation and heat ageing characteristics capable of performing under high pressures and temperatures of up to 190° C for several hours.
A Caprolactam level of less than 1% makes it an ideal choice for most vacuum bagging applications
It can be made available in different forms eg: Lay flat or slit tube and in sheet form.

Wide range of film can be undertaken for development based on the customer requirement where the application is at different temperature and for different purpose.
Parameters Physical Parameters-55 Microns Physical Parameters-65 Microns Physical Parameters-75 Microns
Film Thickness 55 Microns 65 Microns 75 Microns
Film Colour Transparent Green Transparent Green Transparent Green
Resin Compatability Styrene + Epoxy Styrene + Epoxy Styrene + Epoxy
Standard Width
(Lay Flat)
600MM, 800MM, 1200MM, 2000MM, 4000MM 600MM, 800MM, 1200MM, 2000MM, 4000MM 600MM, 800MM, 1200MM, 2000MM, 4000MM
Working Temperature Maximum Upto 180° C Maximum Upto 180° C Maximum Upto 180° C
Storage & Handling
Packing The roll will be wrapped in polyethylene/bubble sheet over and above covered with hard card board case for protecting it from piercing or damaging from the pointed or hard material.
Handling Roll has to be handled properly having taken care roll doesn' t get damanged or pierced.
Storage Has to be stored in the place where the sharp edges are not there. Has to be stored at room temperature and low moisture level place.

Send your message to this supplier

Mr. Zhang Yuanfang

Post a Sourcing Request Now

Last Login Date: Jan 12, 2018

Business Type: Manufacturer/Factory, Trading Company

Main Products: Carbon Fiber, Glass Fiber, Fiberglass Fabric, Carbon Fiber Fabric, Fiberglass Mat, Carbon Fiber Cloth